Norgren Filter Contents Manual do Utilizador descarregar pdf (Página 41)

F47 Oil Removal (Coalescing) Filters

Littleton, CO USA Phone 303-794-2611 www.norgren.com

ALE-2-17

Technical Data

Fluid: Compressed air

Maximum pressure: 250 psig (17 bar)

Operating temperature:* -30° to 150°F (-34° to 65°C)

* Air supply must be dry enough to avoid ice formation at temperatures below 35°F (2°C).

Particle removal: Down to 0.01 µm

Air quality: Within ISO 8573-1, Class 1 (particulates) and Class 2 (oil content)

Maximum remaining oil content in outlet air: 0.01 ppm at 70°F (20°C) with an inlet

concentration of 17 ppm

Maximum flow for oil-saturated element at 90 psig (6.3 bar) inlet pressure to

maintain stated oil removal performance

1-1/2" Ports: 250 scfm (118 dm

/s)

2" Ports: 300 scfm (142 dm

/s)

2" Ports, high flow element: 600 scfm (283 dm

/s)

Typical flow for dry element at 90 psig (6.3 bar) inlet pressure and 5 psid (0.3 bar)

pressure drop

1-1/2" Ports: 780 scfm (368 dm

/s)

2" Ports: 830 scfm (392 dm

/s)

2" Ports, high flow element: 2300 scfm (1086 dm

/s)

Nominal bowl size: 7 fluid ounce (0.2 liter)

Manual drain connection: Will fit 1/8-27 and 1/8-28 pipe thread.

Automatic drain connection: Will fit 1/8-27 and 1/8-28 pipe thread. - Flexible tube

with 3/16" (5mm) minimum I.D. can be connected to the automatic drain. Drain

may fail to operate if the tube I.D. is less than 3/16" (5mm). Avoid restrictions in

the tube.

Automatic drain operating conditions (float operated)

Bowl pressure required to close drain: Greater than 5 psig (0.3 bar)

Bowl pressure required to open drain: Less than 3 psig (0.2 bar)

Minimum air flow required to close drain: 2 scfm (1 dm

/s)

Manual operation: Depress pin inside drain outlet to drain bowl

Materials

Body, intermediate body, bowl: Aluminum

Metal bowl liquid level indicator lens: Transparent nylon

Filter element: Synthetic fiber and polyurethane foam

Elastomers: Neoprene and nitrile

Service indicator

Body: Transparent nylon

Internal parts: Acetal

Spring: Stainless steel

Elastomers: Nitrile

An automatic drain is a two-way valve, which will close

when the system is pressurized. The drain opens

when the float rises due to accumulated liquid and

on depressurization.

0.3

0.2

0.1

PRESSURE DROP

psid

bar d

PORT SIZE: 2"

ELEMENT: SATURATED

0 50 100 150 200 250 dm

AIR FLOW

0 100 200 300 400 500 scfm

(2.5)

(4.0)

INLET PRESSURE:

psig (bar g)

116 (8.0)

150 (10.0)

90 (6.3)

High Flow

Element

90 (6.3)

175 (12.0)

Maximum

flow to

maintain

stated oil

removal

performance

PRESSURE DROP

0.15

0.10

0.05

bar d

2.5

2.0

1.5

1.0

0.5

psid

PORT SIZE: 2"

ELEMENT: DRY

0 100 200 300 400 500 dm

AIR FLOW

0 200 400 600 800 1000 scfm

(4.0)

INLET PRESSURE:

psig (bar g)

116 (8.0)

150 (10.0)

90 (6.3)

High Flow

Element

90 (6.3)

(2.5)

175

(12)

Typical Performance Characteristics

8.16 (207)

8.22 (209)

15.70 (399)

1/4 Turn Manual Drain

23.58 (599) †

23.55 (598)**

High Flow Filter

with Automatic Drain

39.25 (997) **

15.10 (384)

1.86 (47)

3.16 (80)

Automatic Drain

22.99 (584) †

Service

Indicator

Intermediate

Body

Bowl

Intermediate

Body

Bowl

Body

** Minimum clearance required to remove intermediate body and bowl. Add 0.59" (15 mm) for 1/4 turn manual drain.

† Minimum clearance required to remove intermediate body and bowl.

All Dimensions in Inches (mm)

Service Kits

Item Type Part number

Element kit

Standard 3203-02

High flow 3203-05

Sightglass kit All 2273-08

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 52 53

Comentários a estes Manuais

Sem comentários

Norgren Filter Contents Manual do Utilizador Página 41

Comentários a estes Manuais

Manuais e produtos relacionados com Hardware Norgren Filter Contents