Norgren Filter/Regulators Manual do Utilizador descarregar pdf (Página 9)

B74G Filter/Regulators

Littleton, CO USA Phone 303-794-2611 www.norgren.com

ALE-12-9

All Dimensions in Inches (mm)

Technical Data

Fluid: Compressed air

Maximum pressure:

Transparent bowl: 150 psig (10 bar)

Metal bowl: 250 psig (17 bar)

Operating temperature*:

Transparent bowl: -30° to 125°F (-34° to 50°C)

Metal bowl: -30° to 175°F (-34° to 80°C)

* Air supply must be dry enough to avoid ice formation at temperatures below 35°F (2°C).

Particle removal: 5, 25 or 40 µm filter element

Air quality: Within ISO 8573-1, Class 3 and Class 5 (particulates)

Typical flow with 150 psig (10 bar) inlet pressure, 6.3 (90 psig) set pressure and a

droop of 15 psig (1 bar) from set: 212 scfm (100 dm

/s)

Manual drain connection: Will fit 1/8-27 and 1/8-28 pipe thread

Automatic drain connection: Will fit 1/8-27 and 1/8-28 pipe thread

Automatic drain operating conditions (float operated):

Bowl pressure required to close drain: Greater than 5 psig (0.3 bar)

Bowl pressure required to open drain: Less than 3 psig (0.2 bar)

Minimum air flow required to close drain: 2 scfm (1 dm

/s)

Manual operation: Depress pin inside drain outlet to drain bowl

Nominal bowl size: 7 fluid ounce(0.2 liter )

Gauge ports:

1⁄4" PTF with PTF main ports

Rc1⁄4 with ISO Rc main ports

Rc1⁄8 with ISO G main ports

Materials

Body: Aluminum

Bonnet: Aluminum

Valve: Brass

Bowl

Transparent: Polycarbonate with steel bowl guard

Metal: Aluminum

Metal bowl liquid level indicator lens: Transparent nylon

Element: Sintered plastic

Elastomers: Neoprene and Nitrile

An automatic drain is a two-way valve, which will close when the system is

pressurized. The drain opens when the float rises due to accumulated liquid

and on depressurization.

Automatic Drain, Non Relieving Manual Drain, Non Relieving

ISO Symbols

Automatic Drain, Relieving

Manual Drain, Relieving

Typical Performance Characteristics

0 20 40 60 80 100 dm

AIR FLOW

0 40 80 120 160 200 scfm

OUTLET PRESSURE

bar g

100

psig

PORT SIZE: 1/2",

ELEMENT: 40 µm

INLET PRESSURE: 150 psig (10 bar g)

RANGE: 5 to 150 psig (0.3 to 10 bar)

FLOW CHARACTERISTICS

0 20 40 60 80 100 dm

AIR FLOW

0 40 80 120 160 200 scfm

OUTLET PRESSURE

bar g

100

psig

PORT SIZE: 1/2",

ELEMENT: 40 µm

INLET PRESSURE: 100 psig (7 bar g)

RANGE: 5 to 150 psig (0.3 to 10 bar)

FLOW CHARACTERISTICS

4.98 (127)

1.69 (43)

1.24 (31)

9.06 (230)**

6.35 (161)

Automatic Drain

2.89 (74)2.20 (56)

1.45 (37)

3.15 (80)

2.00 (50)

5.95 (151)

6.95 (177)

Manual Drain

9.69 (246)**

Panel mounting hole diameter: 2.06" (52 mm)

Panel thickness: 0.06" to 0.25" (2 to 6 mm)

Service kit includes diaphragm assembly, valve assembly, valve

spring, louvre o-ring, bowl o-ring, drain seal.

Service Kits

Item Type Part Number

Service kit Relieving 4383-700

Non relieving 4383-701

Replacement elements

5 µm 4338-04

25 µm 4338-07

40 µm 4338-05

Liquid level lens kit Prismatic 4380-050

Replacement drains

Automatic (1/8 NPT outlet) 3000-10

Manual quarter turn 619-50

** Minimum clearance to remove bowl.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 17 18

Comentários a estes Manuais

Sem comentários

Norgren Filter/Regulators Manual do Utilizador Página 9

Comentários a estes Manuais

Manuais e produtos relacionados com Hardware Norgren Filter/Regulators